San Francisco Community College District - Harry Britt Building Storefront Doors Replacement - IFB# 2026-191R (2026)
City College Of San FranciscoHigher Ed · San Francisco, CA- Due
- Jul 9, 2026
- Deadline passed
- Posted
- Jun 6, 2026
The 30-second brief
The San Francisco Community College District is seeking bids for the Harry Britt Building Storefront Doors Replacement project, IFB# 2026-191R, located at CCSF Ocean Campus, 50 Frida Kahlo Way, San Francisco, CA. The scope of work involves demolition and disposal of existing doors, supplying and installing FRP single doors (36" x 90") and FRP double doors (72" x 90") in clear finish with 1" tempered insulated glass, fire-rated door frames, low voltage CAT 6 wiring (~250 ft), Von Duprin EPT 10 electric power transfers, continuous hinges with ANSI/BHMA A156.26 certification, and replacing ADA push button assemblies with matching blank plates. Contractors must possess a State of California C-17 or C61/D28 contractor's license and be registered with the Department of Industrial Relations. A mandatory pre-bid conference and site visit is scheduled for June 23, 2026, at 9:00 AM at the CCSF Facility Office, B606. Sealed bids are due by July 9, 2026, at 2:00 PM at the District Facilities Office, B-606.
Demo and properly dispose of existing doors; Supply and install FRP single door (36” x 90”) in clear finish with 1” tempered insulated glass only; Supply and install FRP double door (72” x 90”) in clear finish with 1” tempered insulated glass only; Supply and install fire rated door frame for all newly installed doors; Run low voltage wire (CAT 6) from IDFs rooms to north double door and south single door (~250 ft); Change electric doors hinges to electric continuous hinge to Electric Power Transfer (EPT) by Von Duprin Model EPT 10; Install Continuous Hinge with Heavy Duty (Grade 1) certification under ANSI/BHMA A156.26 standard with 3" Bearing Centers for all other non-electric doors; Decommission, Remove, And replace all existing Automatic Door Activation (ADA) push button assemblies with blank wall plates; Preserve existing wiring and provide new electrified push/panic bar for doors 1.1, 1.2, And 6 (5 single leaf doors); Demo existing automatic door actuators and associated components, Retaining upper portion of sub-frames and existing wiring, Maintaining door heights at 90 inches
Lowest responsive responsible bidder based on the base bid amount only
Hear what City College Of San Francisco plans next before it's posted.
Get alerts freeFree account · 30-second setup · No credit card
Summary
The San Francisco Community College District is seeking bids for the Harry Britt Building Storefront Doors Replacement project, IFB# 2026-191R, located at CCSF Ocean Campus, 50 Frida Kahlo Way, San Francisco, CA. The scope of work involves demolition and disposal of existing doors, supplying and installing FRP single doors (36" x 90") and FRP double doors (72" x 90") in clear finish with 1" tempered insulated glass, fire-rated door frames, low voltage CAT 6 wiring (~250 ft), Von Duprin EPT 10 electric power transfers, continuous hinges with ANSI/BHMA A156.26 certification, and replacing ADA push button assemblies with matching blank plates.
Contractors must possess a State of California C-17 or C61/D28 contractor's license and be registered with the Department of Industrial Relations. A mandatory pre-bid conference and site visit is scheduled for June 23, 2026, at 9:00 AM at the CCSF Facility Office, B606. Sealed bids are due by July 9, 2026, at 2:00 PM at the District Facilities Office, B-606.
EVALUATION CRITERIA
Lowest responsive responsible bidder based on the base bid amount only
REQUIRED DELIVERABLES
10- Demo and properly dispose of existing doors
- Supply and install FRP single door (36” x 90”) in clear finish with 1” tempered insulated glass only
- Supply and install FRP double door (72” x 90”) in clear finish with 1” tempered insulated glass only
- Supply and install fire rated door frame for all newly installed doors
- Run low voltage wire (CAT 6) from IDFs rooms to north double door and south single door (~250 ft)
- Change electric doors hinges to electric continuous hinge to Electric Power Transfer (EPT) by Von Duprin Model EPT 10
- Install Continuous Hinge with Heavy Duty (Grade 1) certification under ANSI/BHMA A156.26 standard with 3" Bearing Centers for all other non-electric doors
- Decommission, Remove, And replace all existing Automatic Door Activation (ADA) push button assemblies with blank wall plates
- Preserve existing wiring and provide new electrified push/panic bar for doors 1.1, 1.2, And 6 (5 single leaf doors)
- Demo existing automatic door actuators and associated components, Retaining upper portion of sub-frames and existing wiring, Maintaining door heights at 90 inches
REQUIRED ATTACHMENTS
Bid Form and Proposal, Bid bond or cashier's check or certified check in the amount of ten percent (10%) of total bid price, Performance Bond, Payment Bond
- Submit to
- District Facilities Office, B606 50 Frida Kahlo Way, San Francisco, CA 94112
- Scope location
- San Francisco, CA
- Reported agency
- San Francisco Community College District
Questions about this BID
How do I respond to this Bid from City College Of San Francisco?
Review the full solicitation document for submission requirements, evaluation criteria, and deadlines. The submission deadline is July 9, 2026. The solicitation specifies required deliverables that must be addressed in your response. Be sure to include all required attachments as outlined in the solicitation. Submissions should be delivered to: District Facilities Office, B606 50 Frida Kahlo Way, San Francisco, CA 94112.
Can small businesses or minority-owned firms bid on this Bid?
Most government agencies, including City College Of San Francisco in CA, encourage participation from small businesses, minority-owned, women-owned, and disadvantaged business enterprises (MBE/WBE/DBE). Check the full solicitation for any small business participation goals.
What happens after the Bid submission deadline?
After the deadline, the issuing agency reviews all submissions against the stated evaluation criteria. This typically includes a compliance check, technical evaluation, cost analysis, and may involve oral presentations with shortlisted vendors.
What are the key deliverables?
The solicitation specifies the following deliverables: Demo and properly dispose of existing doors; Supply and install FRP single door (36” x 90”) in clear finish with 1” tempered insulated glass only; Supply and install FRP double door (72” x 90”) in clear finish with 1” tempered insulated glass only; Supply and install fire rated door frame for all ne. Proposals should clearly address how each deliverable will be met.
Show 4 more questions
What are the evaluation criteria for this solicitation?
This solicitation includes specific evaluation criteria that will be used to score proposals. The criteria include: "Lowest responsive responsible bidder based on the base bid amount only" Vendors should carefully align their proposals with each criterion to maximize their score.
Where can I find more RFPs from City College Of San Francisco?
All active and historical solicitations from City College Of San Francisco are tracked and searchable. As a higher ed agency, City College Of San Francisco regularly publishes solicitations. Visit the agency profile to see current open bids, past contracts, vendor relationships, and decision-maker contacts.
What documents are required to bid on this Bid?
Requirements vary by solicitation, but common documents include a technical proposal, cost/price proposal, proof of insurance, relevant certifications, past performance references, and any forms specified in the solicitation. This solicitation specifically requires the following attachments: Bid Form and Proposal, Bid bond or cashier's check or certified check in the amount of ten percent (10%) of total bid price, Performance Bond, Payment Bond. Review the full document from City College Of San Francisco for the complete list.
What is the scope of this project?
This solicitation defines a specific project scope. The scope covers the following locations: San Francisco, CA. Review the full solicitation for detailed scope requirements.
