County of Fresno Road Maintenance and Rehabilitation Account Asphalt Concrete Overlays - Contract 26-04-M (2026)
Fresno CountyCounty · Fresno, CA- Due
- Jul 22, 2026
- Deadline passed
- Posted
- Jul 2, 2026
- Primary contact
- Design Services
- (559) 353-4919
The 30-second brief
The County of Fresno Department of Public Works and Planning is seeking bids for cold planing existing asphalt concrete pavement, furnishing and placing hot mix asphalt (HMA) type A asphalt concrete overlays, traffic striping, and shoulder backing on various existing roads in Fresno County under Contract Number 26-04-M. The base bid requires hot mix asphalt overlay over approximately 3.1 miles (8.2 lane miles) of roadway in the Malaga area, with an additional 0.27 miles (0.54 lane miles) included as an additive bid. The work involves HMA 3/4" grading, minor HMA, geosynthetic pavement interlayer, tack coat, traffic inductive loops, replacement asphalt concrete pavement, cold planing, survey monuments, thermoplastic traffic stripes, and pavement markings. The project is funded by the Senate Bill 1 Road Maintenance and Rehabilitation Account (SB-1 RMRA) and has an estimated cost range of $4,600,000 to $5,100,000. Bids are due by July 22, 2026, at 2:00 P.M. Bidders must possess a valid California Contractor's License Class A (General Engineering) or Class C-12 (Earthwork and Paving).
Hot mix asphalt (HMA) type A 3/4" grading, Minor HMA, Geosynthetic pavement interlayer, Geosynthetic binder, Place hot mix asphalt dike type E case-R, Tack coat, Traffic inductive loops type D & E, Replace asphalt concrete pavement, Remove asphalt concrete dike, Cold plane asphalt concrete pavement, Survey monuments type D, Paint dike 2-coat, Remove pavement markers, Retroreflective pavement markers type G, Thermoplastic traffic stripes (various details), Thermoplastic pavement markings (limit lines, Railroad crossing, Signal ahead, Stop ahead, Type IV, I, VI, And VII arrows), Construction project funding signs, Traffic control system, Portable changeable message sign, Job site management, Prepare water pollution prevention plan implement and maintain, Shoulder backing, Finishing roadway, Mobilization
Hear what Fresno County plans next before it's posted.
Get alerts freeFree account · 30-second setup · No credit card
Summary
The County of Fresno Department of Public Works and Planning is seeking bids for cold planing existing asphalt concrete pavement, furnishing and placing hot mix asphalt (HMA) type A asphalt concrete overlays, traffic striping, and shoulder backing on various existing roads in Fresno County under Contract Number 26-04-M. The base bid requires hot mix asphalt overlay over approximately 3.1 miles (8.2 lane miles) of roadway in the Malaga area, with an additional 0.27 miles (0.54 lane miles) included as an additive bid.
The work involves HMA 3/4" grading, minor HMA, geosynthetic pavement interlayer, tack coat, traffic inductive loops, replacement asphalt concrete pavement, cold planing, survey monuments, thermoplastic traffic stripes, and pavement markings. The project is funded by the Senate Bill 1 Road Maintenance and Rehabilitation Account (SB-1 RMRA) and has an estimated cost range of $4,600,000 to $5,100,000. Bids are due by July 22, 2026, at 2:00 P.M. Bidders must possess a valid California Contractor's License Class A (General Engineering) or Class C-12 (Earthwork and Paving).
REQUIRED DELIVERABLES
Hot mix asphalt (HMA) type A 3/4" grading, Minor HMA, Geosynthetic pavement interlayer, Geosynthetic binder, Place hot mix asphalt dike type E case-R, Tack coat, Traffic inductive loops type D & E, Replace asphalt concrete pavement, Remove asphalt concrete dike, Cold plane asphalt concrete pavement, Survey monuments type D, Paint dike 2-coat, Remove pavement markers, Retroreflective pavement markers type G, Thermoplastic traffic stripes (various details), Thermoplastic pavement markings (limit lines, Railroad crossing, Signal ahead, Stop ahead, Type IV, I, VI, And VII arrows), Construction project funding signs, Traffic control system, Portable changeable message sign, Job site management, Prepare water pollution prevention plan implement and maintain, Shoulder backing, Finishing roadway, Mobilization
REQUIRED ATTACHMENTS
Bid bond, bid security, bidder's declaration, bid form, evaluation of bid item list, non-collusion declaration, public contract code section 10285.1 statement, public contract code section 10162 questionnaire and public contract code 10232 statement, subcontractor list, certificate of reported compliance for in-use off-road diesel-fueled fleets, opt out of payment adjustments for price index fluctuations form
- Submit to
- https://www.bidexpress.com
- Scope location
- Fresno County, California
- Reported agency
- County of Fresno
Questions about this BID
How do I respond to this Bid from Fresno County?
Review the full solicitation document for submission requirements, evaluation criteria, and deadlines. The submission deadline is July 22, 2026. The solicitation specifies required deliverables that must be addressed in your response. Be sure to include all required attachments as outlined in the solicitation. Submissions should be delivered to: https://www.bidexpress.com. For questions, contact Design Services.
Can small businesses or minority-owned firms bid on this Bid?
Most government agencies, including Fresno County in CA, encourage participation from small businesses, minority-owned, women-owned, and disadvantaged business enterprises (MBE/WBE/DBE). Check the full solicitation for any small business participation goals.
What happens after the Bid submission deadline?
After the deadline, the issuing agency reviews all submissions against the stated evaluation criteria. This typically includes a compliance check, technical evaluation, cost analysis, and may involve oral presentations with shortlisted vendors.
Can I ask questions about this solicitation before submitting?
Yes, most solicitations allow vendors to submit questions during a designated period. The primary contact is Design Services at (559) 353-4919. Questions and answers are typically shared with all prospective bidders.
What are the key deliverables?
The solicitation specifies the following deliverables: Hot mix asphalt (HMA) type A 3/4" grading, Minor HMA, Geosynthetic pavement interlayer, Geosynthetic binder, Place hot mix asphalt dike type E case-R, Tack coat, Traffic inductive loops type D & E, Replace asphalt concrete pavement, Remove asphalt concrete dike, Cold plane asphalt concrete pavement,. Proposals should clearly address how each deliverable will be met.
Show 3 more questions
Where can I find more RFPs from Fresno County?
All active and historical solicitations from Fresno County are tracked and searchable. As a county agency, Fresno County regularly publishes solicitations. Visit the agency profile to see current open bids, past contracts, vendor relationships, and decision-maker contacts.
What documents are required to bid on this Bid?
Requirements vary by solicitation, but common documents include a technical proposal, cost/price proposal, proof of insurance, relevant certifications, past performance references, and any forms specified in the solicitation. This solicitation specifically requires the following attachments: Bid bond, bid security, bidder's declaration, bid form, evaluation of bid item list, non-collusion declaration, public contract code section 10285.1 statement, public contract code section 10162 quest. Review the full document from Fresno County for the complete list.
What is the scope of this project?
This solicitation defines a specific project scope. The scope covers the following locations: Fresno County, California. Review the full solicitation for detailed scope requirements.