City of Lomita - Zone G Water Main Replacement Project - 2026
City of LomitaCity · Lomita, CA- Due
- Oct 19, 2026
- Deadline passed
- Primary contact
- Leslie Louie
- (310) 325-7110
The 30-second brief
The City of Lomita is seeking bids for the Zone G Water Main Replacement Project in Los Angeles, CA. The scope of work includes the construction of new ductile iron pipe (DIP) water mains, specifically 500 LF of 6-inch, 3,900 LF of 8-inch, and 60 LF of 12-inch water main. Additional work comprises furnishing and installing an 8" x 4" x 8" ductile iron restrained tee, a 4" ductile iron restrained resilient gate valve, cutting and plugging/abandoning existing water mains, constructing 361 TN of 6" permanent asphalt concrete base course, providing temporary bypass and temporary connection of water services, removing and replacing 5,000 LF of PCC type A2 curb and gutter, and replacing all striping and pavement markings. The submission deadline is October 19, 2026, at 1:00 PM, with a notice of interest deadline on October 5, 2026, at 1:00 PM.
500 LF construct new 6" DIP water main, 3, 900 LF construct new 8" DIP water main, 60 LF construct new 12" DIP water main, 1 EA furnish and install 8" x 4" x 8" ductile iron restrained tee, 1 EA furnish and install 4" ductile iron restrained resilient gate valve, 1 LS cut and plug and abandon existing water mains, 361 TN construct 6" permanent asphalt concrete base course, 1 LS provide temporary bypass and temporary connection of water services, 5, 000 LF remove and replace PCC type A2 curb and gutter, 1 LS replace all striping, Pavement markings
Get notified when Lomita posts the next one.
Get alerts freeFree account · 30-second setup · No credit card
Summary
The City of Lomita is seeking bids for the Zone G Water Main Replacement Project in Los Angeles, CA. The scope of work includes the construction of new ductile iron pipe (DIP) water mains, specifically 500 LF of 6-inch, 3,900 LF of 8-inch, and 60 LF of 12-inch water main.
Additional work comprises furnishing and installing an 8" x 4" x 8" ductile iron restrained tee, a 4" ductile iron restrained resilient gate valve, cutting and plugging/abandoning existing water mains, constructing 361 TN of 6" permanent asphalt concrete base course, providing temporary bypass and temporary connection of water services, removing and replacing 5,000 LF of PCC type A2 curb and gutter, and replacing all striping and pavement markings. The submission deadline is October 19, 2026, at 1:00 PM, with a notice of interest deadline on October 5, 2026, at 1:00 PM.
REQUIRED DELIVERABLES
500 LF construct new 6" DIP water main, 3, 900 LF construct new 8" DIP water main, 60 LF construct new 12" DIP water main, 1 EA furnish and install 8" x 4" x 8" ductile iron restrained tee, 1 EA furnish and install 4" ductile iron restrained resilient gate valve, 1 LS cut and plug and abandon existing water mains, 361 TN construct 6" permanent asphalt concrete base course, 1 LS provide temporary bypass and temporary connection of water services, 5, 000 LF remove and replace PCC type A2 curb and gutter, 1 LS replace all striping, Pavement markings
- Submit to
- 24300 Narbonne Ave, Lomita, CA, 90717
- Scope location
- Los Angeles, CA
Questions about this BID
How do I respond to this Bid from City of Lomita?
Review the full solicitation document for submission requirements, evaluation criteria, and deadlines. The submission deadline is October 19, 2026. The solicitation specifies required deliverables that must be addressed in your response. Submissions should be delivered to: 24300 Narbonne Ave, Lomita, CA, 90717. For questions, contact Leslie Louie.
Can small businesses or minority-owned firms bid on this Bid?
Most government agencies, including City of Lomita in CA, encourage participation from small businesses, minority-owned, women-owned, and disadvantaged business enterprises (MBE/WBE/DBE). Check the full solicitation for any small business participation goals.
What happens after the Bid submission deadline?
After the deadline, the issuing agency reviews all submissions against the stated evaluation criteria. This typically includes a compliance check, technical evaluation, cost analysis, and may involve oral presentations with shortlisted vendors.
Can I ask questions about this solicitation before submitting?
Yes, most solicitations allow vendors to submit questions during a designated period. The primary contact is Leslie Louie at (310) 325-7110. Questions and answers are typically shared with all prospective bidders.
What are the key deliverables?
The solicitation specifies the following deliverables: 500 LF construct new 6" DIP water main, 3, 900 LF construct new 8" DIP water main, 60 LF construct new 12" DIP water main, 1 EA furnish and install 8" x 4" x 8" ductile iron restrained tee, 1 EA furnish and install 4" ductile iron restrained resilient gate valve, 1 LS cut and plug and abandon existi. Proposals should clearly address how each deliverable will be met.
Show 3 more questions
Where can I find more RFPs from City of Lomita?
All active and historical solicitations from City of Lomita are tracked and searchable. As a city agency, City of Lomita regularly publishes solicitations. Visit the agency profile to see current open bids, past contracts, vendor relationships, and decision-maker contacts.
What documents are required to bid on this Bid?
Requirements vary by solicitation, but common documents include a technical proposal, cost/price proposal, proof of insurance, relevant certifications, past performance references, and any forms specified in the solicitation. Review the full document from City of Lomita for the complete list.
What is the scope of this project?
This solicitation defines a specific project scope. The scope covers the following locations: Los Angeles, CA. Review the full solicitation for detailed scope requirements.