RFQOPEN
Save

Department of Administration - Testing and Inspection Services for Science Research Building - DPW Project No. 24190, 2026

State of Idaho logoState of Idaho
Due
Dec 21, 2026
31 days left
Posted
Nov 16, 2026
Primary contact
Martin Santoyo
(208) 332-1913

The 30-second brief

What they're buying

The State of Idaho, Department of Administration, Division of Public Works (DPW) is requesting Statement of Qualifications (SOQ) from testing and inspection professionals for DPW Project No. 24190, Science Research Building at Boise State University (BSU) in Boise, Idaho. The project involves a new 4-story, approximately 92,000 gross sq. ft. science research building supporting biomedical sciences research, including approximately 52,591 sq. ft. of lab and research space. The scope includes demolition of existing modular buildings, utilities, site improvements, landscaping, streetscapes, and infrastructure. Required services encompass construction testing and inspections such as soils and aggregate tests, subsurface geotechnical investigation reports, soil compaction testing, concrete special inspection and quality control, concrete sampling and testing, masonry inspection, detailed welding inspections, non-destructive examination, high-strength bolting connections, steel fabrication shop inspections, fireproofing inspections, asphalt paving testing, floor flatness testing, floor moisture vapor emission testing, and GPR for reinforcing steel. The testing firm and staff must be located within 25 miles of the project site. The total project budget is $129,090,127.00 with an estimated construction budget of $108,590,127.00. Submittals are due on December 21, 2026, at 3:00 PM Mountain Standard Time. Evaluation is based on format/cover sheet, general qualifications, team member qualifications, project examples, and technical approach.

What you must deliver

Testing and Inspection Services, Soils and aggregate tests, Subsurface geotechnical investigation reports, Soil compaction testing of fill materials, Concrete special inspection and quality control, Concrete sampling and testing, Special masonry inspection, Detailed welding inspections, Non-destructive examination of welds, High-strength bolting connections, Steel fabrication shop inspections, Fireproofing inspections, Asphalt paving testing, Floor flatness testing, Floor moisture vapor emission testing, GPR for locating reinforcing steel, Testing reports, Final Testing and Inspection Report

How it's scored

Format / Cover Sheet (5 points), General Qualifications (10 points), Team Member Qualifications (15 points), Project Examples (15 points), Technical Approach (25 points)

31 days left to submitDue Dec 21

Bids like this start as pre-RFPs. Get the next ones early.

Get matched pre-RFPs free

Free account · 30-second setup · No credit card

Summary

The State of Idaho, Department of Administration, Division of Public Works (DPW) is requesting Statement of Qualifications (SOQ) from testing and inspection professionals for DPW Project No. 24190, Science Research Building at Boise State University (BSU) in Boise, Idaho.

The project involves a new 4-story, approximately 92,000 gross sq. ft. science research building supporting biomedical sciences research, including approximately 52,591 sq. ft. of lab and research space. The scope includes demolition of existing modular buildings, utilities, site improvements, landscaping, streetscapes, and infrastructure. Required services encompass construction testing and inspections such as soils and aggregate tests, subsurface geotechnical investigation reports, soil compaction testing, concrete special inspection and quality control, concrete sampling and testing, masonry inspection, detailed welding inspections, non-destructive examination, high-strength bolting connections, steel fabrication shop inspections, fireproofing inspections, asphalt paving testing, floor flatness testing, floor moisture vapor emission testing, and GPR for reinforcing steel. The testing firm and staff must be located within 25 miles of the project site. The total project budget is $129,090,127.00 with an estimated construction budget of $108,590,127.00. Submittals are due on December 21, 2026, at 3:00 PM Mountain Standard Time. Evaluation is based on format/cover sheet, general qualifications, team member qualifications, project examples, and technical approach.

EVALUATION CRITERIA

Format / Cover Sheet5 pts
General Qualifications10 pts
Team Member Qualifications15 pts
Project Examples15 pts
Technical Approach25 pts

REQUIRED DELIVERABLES

18
  • Testing and Inspection Services
  • Soils and aggregate tests
  • Subsurface geotechnical investigation reports
  • Soil compaction testing of fill materials
  • Concrete special inspection and quality control
  • Concrete sampling and testing
  • Special masonry inspection
  • Detailed welding inspections
  • Non-destructive examination of welds
  • High-strength bolting connections
  • Steel fabrication shop inspections
  • Fireproofing inspections
  • Asphalt paving testing
  • Floor flatness testing
  • Floor moisture vapor emission testing
  • GPR for locating reinforcing steel
  • Testing reports
  • Final Testing and Inspection Report

REQUIRED ATTACHMENTS

6
  • Cover Sheet
  • General Qualifications
  • Team Member Qualifications
  • Project Examples
  • Technical Approach
  • USB drive containing a PDF of the submittal
Submit to
Mailing address, shown to Civic IQ members.Sign up free to see it
Scope location
Boise, Idaho
Projected sq ft
92,000 sq ft

Questions about this RFQ

How do I respond to this RFQ from State of Idaho?

Review the full solicitation document for submission requirements, evaluation criteria, and deadlines. The submission deadline is December 21, 2026. The solicitation specifies required deliverables that must be addressed in your response. Be sure to include all required attachments as outlined in the solicitation. Submissions go to a mailing address at the agency; Civic IQ members see the exact address. For questions, contact Martin Santoyo.

Can small businesses or minority-owned firms bid on this RFQ?

Most government agencies, including State of Idaho in ID, encourage participation from small businesses, minority-owned, women-owned, and disadvantaged business enterprises (MBE/WBE/DBE). Check the full solicitation for any small business participation goals.

What happens after the RFQ submission deadline?

After the deadline, the issuing agency reviews all submissions against the stated evaluation criteria. This typically includes a compliance check, technical evaluation, cost analysis, and may involve oral presentations with shortlisted vendors.

Can I ask questions about this solicitation before submitting?

Yes, most solicitations allow vendors to submit questions during a designated period. The primary contact is Martin Santoyo at (208) 332-1913. Questions and answers are typically shared with all prospective bidders.

What are the key deliverables?

The solicitation specifies the following deliverables: Testing and Inspection Services, Soils and aggregate tests, Subsurface geotechnical investigation reports, Soil compaction testing of fill materials, Concrete special inspection and quality control, Concrete sampling and testing, Special masonry inspection, Detailed welding inspections, Non-destruct. Proposals should clearly address how each deliverable will be met.

Show 5 more questions

What are the evaluation criteria for this solicitation?

This solicitation includes specific evaluation criteria that will be used to score proposals. The criteria include: "Format / Cover Sheet (5 points), General Qualifications (10 points), Team Member Qualifications (15 points), Project Examples (15 points), Technical Approach (25 points)" Vendors should carefully align their proposals with each criterion to maximize their score.

Where can I find more RFPs from State of Idaho?

All active and historical solicitations from State of Idaho are tracked and searchable. As a state government agency, State of Idaho regularly publishes solicitations. Visit the agency profile to see current open bids, past contracts, vendor relationships, and decision-maker contacts.

Is this solicitation still open for submissions?

Based on the posted deadline of December 21, 2026, this solicitation appears to still be accepting submissions. Deadlines may change through amendments or addenda, so always verify the current status directly with the issuing agency before preparing your response.

What documents are required to bid on this RFQ?

Requirements vary by solicitation, but common documents include a technical proposal, cost/price proposal, proof of insurance, relevant certifications, past performance references, and any forms specified in the solicitation. This solicitation specifically requires the following attachments: Cover Sheet, General Qualifications, Team Member Qualifications, Project Examples, Technical Approach, USB drive containing a PDF of the submittal. Review the full document from State of Idaho for the complete list.

What is the scope of this project?

This solicitation defines a specific project scope. The scope covers the following locations: Boise, Idaho. The total projected area is 92000 sq ft. Review the full solicitation for detailed scope requirements.

Work in government? Get Civic IQ free →

The coverage behind every signal

agencies covered
275,000+agencies covered
buying signals a week
400,000+buying signals a week
decision makers
2.6M+decision makers
in government spend tracked
$14T+in government spend tracked

Trusted by 200+ enterprise teams

Motive logoVeritone logoTerraCycle logoCyvl logoWithersRavenel logoDerivita logoSafeTouch logoIANS Research logoSewerAI logoProdigy Education logoEPR Fireworks logoFlow Labs logoCloudpermit logoMotive logoVeritone logoTerraCycle logoCyvl logoWithersRavenel logoDerivita logoSafeTouch logoIANS Research logoSewerAI logoProdigy Education logoEPR Fireworks logoFlow Labs logoCloudpermit logoMotive logoVeritone logoTerraCycle logoCyvl logoWithersRavenel logoDerivita logoSafeTouch logoIANS Research logoSewerAI logoProdigy Education logoEPR Fireworks logoFlow Labs logoCloudpermit logoMotive logoVeritone logoTerraCycle logoCyvl logoWithersRavenel logoDerivita logoSafeTouch logoIANS Research logoSewerAI logoProdigy Education logoEPR Fireworks logoFlow Labs logoCloudpermit logo

Start finding government buyers today.

Signals from 275,000+ state, local and education agencies, months before the RFP. Free to start.

No credit card required